Here is how your coax connects to the top of the center post to feed all the bands. Of
course, you need to seal it up with liquid tape or silicone to prevent moisture from entering
the braid and contaminating it. The wires are shown installed here as well as the radial cords.
Use an eyebolt through the cap on top to anchor all the radial cords.
course, you need to seal it up with liquid tape or silicone to prevent moisture from entering
the braid and contaminating it. The wires are shown installed here as well as the radial cords.
Use an eyebolt through the cap on top to anchor all the radial cords.
Step 3 photo 7
Hexagonal beam by K4KIO
