You will need two of these tip spacers for each band. Each of these will be used to connect
one end of a driver wire to one end of the reflector wire. Later, the space between the tips of
those wires will be adjusted precisely to the specifications called for on each band. So you
need to make the length long enough to allow for no less than the tip spaces called for on
each band. The Kevlar is very strong and will not stretch and has a covering of Dacron to
protect against ultraviolet radiation. With the jumbo size terminal strips, it will be easy to
insert the wires alongside the cord.
one end of a driver wire to one end of the reflector wire. Later, the space between the tips of
those wires will be adjusted precisely to the specifications called for on each band. So you
need to make the length long enough to allow for no less than the tip spaces called for on
each band. The Kevlar is very strong and will not stretch and has a covering of Dacron to
protect against ultraviolet radiation. With the jumbo size terminal strips, it will be easy to
insert the wires alongside the cord.
Step 4 photo 4
Hex beam by K4KIO
