Here is the attachment of the 20 meter wire/tim space assembly to spreaders 2,3,4 and 5. Note the support
cord.
cord.
Step 6 photo 4
Hex beam by K4KIO
Attach the six permanent support cords as shown. Now, remove all 12 temporary nylon cords
and discard. You are ready to make adjustments of the clamps and terminal strips to achieve
symmetry and balance and level wires on the hex beam. When you are finished with 20
meters, the final shape of the hex beam will have been achieved.
and discard. You are ready to make adjustments of the clamps and terminal strips to achieve
symmetry and balance and level wires on the hex beam. When you are finished with 20
meters, the final shape of the hex beam will have been achieved.