Step 6 Photo 7
Hex beam by K4KIO
Now install the 17 meter wire/tip spacer assembly in the same manner as the 20 meter
assembly. However, you will not anchor the assembly at the spreaders but merely loop cable
ties over it so that the assembly can move freely. You will not want to have the other
assemblies taut. Let the 20 meter assembly control the shape of the hex beam. Taut wires
do not enhance performance.
This is a connection to spreader 1 of Band 17.
assembly. However, you will not anchor the assembly at the spreaders but merely loop cable
ties over it so that the assembly can move freely. You will not want to have the other
assemblies taut. Let the 20 meter assembly control the shape of the hex beam. Taut wires
do not enhance performance.
This is a connection to spreader 1 of Band 17.
