Step 3, photo 2
Hexagonal beam by K4KIO
Drill holes for the
terminals 3/16"
terminals 3/16"
Flange
Drill holes for the
terminals 3/16"
terminals 3/16"
Flange
Split PVC conduit
Measure and mark holes to drill in one of the conduit sides that will be the front. All terminal
holes and the coax connector will be on the front. There will be no hardware installed on the
back side as it must be able to slip up and down for disassembly.
Holes to be drilled are for 10 terminals, one SO239 and the two mounting bolt holes for it
holes and the coax connector will be on the front. There will be no hardware installed on the
back side as it must be able to slip up and down for disassembly.
Holes to be drilled are for 10 terminals, one SO239 and the two mounting bolt holes for it