Step 5 photo 3
Hexagonal beam by K4KIO
Here is how the support cords are connected to the end of the spreaders. Just hook
down into the end and then secure the hook with a large cable tie.
Note how the wire is anchored to the P clip with a small cable tie. This should be done
on the back four spreaders and for 20 meters only, as the last step after all
adjustments of wires and clamps have been completed. Anchoring the wire in this
manner will add stability to the overall structure in windy conditions. Plus it will keep
the wires from "sawing" through the P clip.
down into the end and then secure the hook with a large cable tie.
Note how the wire is anchored to the P clip with a small cable tie. This should be done
on the back four spreaders and for 20 meters only, as the last step after all
adjustments of wires and clamps have been completed. Anchoring the wire in this
manner will add stability to the overall structure in windy conditions. Plus it will keep
the wires from "sawing" through the P clip.