Connect the driver wires to the terminal posts. Then string the driver wires through the
connector blocks on Spreaders 1 and 6. String the reflector wire through Spreaders
2,3,4 and 5. Connect the 20 meter tip spacers so as to make a loop all around the
perimeter of the hex beam.
connector blocks on Spreaders 1 and 6. String the reflector wire through Spreaders
2,3,4 and 5. Connect the 20 meter tip spacers so as to make a loop all around the
perimeter of the hex beam.
Step 6 photo 2
Hex beam by K4KIO
