When you stick the bolt down inside the post with this wire, push it through a terminal hole,
hold it in place with your other hand and then push the wire in further to disengage it from
the bolt. Put a nut on the bolt it to hold it. This is a lot easier than it would seem.
Work with the holes from the middle of the center post and then toward the ends.
hold it in place with your other hand and then push the wire in further to disengage it from
the bolt. Put a nut on the bolt it to hold it. This is a lot easier than it would seem.
Work with the holes from the middle of the center post and then toward the ends.
Step1 photo 12
Hex beam by K4KIO