Step 2 photo 4
Hexagonal beam by K4KIO
Slip the hose clamps and P clips on now for use in attaching the wires later at the places
marked in the preceding photo. Use the #8 Med clamps on the large section and #6 on the
other two sections. Insert P clamps under them for slipping the wires through later. Tighten
them only a little as you will be making adjustments later in the assembly stage.
marked in the preceding photo. Use the #8 Med clamps on the large section and #6 on the
other two sections. Insert P clamps under them for slipping the wires through later. Tighten
them only a little as you will be making adjustments later in the assembly stage.