You will have four end spacer assemblies per band like this for a total of 20 for a five band
hexbeam. This end spacer is used to adjust the space from the end of the wire to the
spreader where it is connected. The spaces for each band's driver and reflector wires are
in the table on the Specifications page.
hexbeam. This end spacer is used to adjust the space from the end of the wire to the
spreader where it is connected. The spaces for each band's driver and reflector wires are
in the table on the Specifications page.
Step 4 photo 4
Hex beam by K4KIO