All wires have been installed. Let the 20 meter wires hold the hex beam in shape. Do not
over tighten the other wires. It will not harm the performance and over tightening can result
in distortion of the overall shape of the hex beam.
Notice how slack the other wires are here as compared to the 20 meter wire (on the bottom
as viewed from this angle below).
over tighten the other wires. It will not harm the performance and over tightening can result
in distortion of the overall shape of the hex beam.
Notice how slack the other wires are here as compared to the 20 meter wire (on the bottom
as viewed from this angle below).
Step 6 photo 6
Hex beam by K4KIO